The device belongs to the class of indicative seals (IS). It is cast as two semicircles connected by a bridge. The seal is made of polypropylene.




Water Meter Seal:
-
Overall dimensions of the assembled device make up 37x46x18.
-
The seal is meant for sealing water meters (flow meters).
-
It is placed on a coupling nut, completely blocking the access to it and thus excluding the possibility of its unscrewing from the pipe (from the water meter).
-
The seal of the largest measure is designed to be placed in pipe couplings G ½ - ¾ G-G1 (pipes counters). Available 4 output measurements: 27/31 mm (corresponding to 3 / 4G x 1 / 2G), 27/34 mm (corresponding to 3 / 4G x 1G) 27/22 mm (corresponding to 3 / 4G x 1 / 2G), 39 / 39mm (corresponding to 1.1 / 1.1 x 8G / 8G). Case diameter is 50mm seal closed.
-
Dimensions seal of small measure the assembled device are 37x46x18 mm.
-
Marking is made by laser printing method: seven-digit number is marked on both semicircles of the seal.
-
Force of the device does not exceed 4 kg/cm. Application does not require special skills and special instruments.
-
The device is able to work within temperature range -40ºC to +60ºC.
-
Shelf life – 5 years upon manufacturing.
-
Available colors: blue, white, yellow, orange.
-
Packing seal large measure: cartons box of 200 units. Box measures 400x300x180mm. 2.50 kg weight.
